ZEEZ F7 3030 FLIGHT CONTROLLER V2

  • Sale
  • Regular price $64.99
Tax included. Shipping calculated at checkout.

Order in 0H, 44M, 42 Seconds (before 3pm AEST) for same day despatch.


The ZEEZ F7 V2 3030 is an 8 Motor Output, DJI HD System Ready Flight Controller with an on-board 9V@3A regulator to power the DJI Air Unit, with a simple plug and play configuration and 5V@3A regulator to power all the peripheral.

It uses a powerful F7 processor along with top-of-the-line hardware: MPU6000 Gyro, BMP280 Barometer. The ZEEZ F7 V2 3030 comes in a standard 30×30 form factor. It comes with spaces and pads for TBS Crossfire and TBS Unify Nano32 for a very clean and low-profile assembly. It has easy plug and play RGB led with 4 connectors on the corners plus 4 onboard RGB LED. There are 5 UARTS available as well as, I2C port, 16MB Flash memory for Blackbox data record, an OSD chip for analog video and LC Filter to power the Analog camera and VTX.

We took all the feedback given to us from the V1 and have improved the overall stability and power supply cleaning. We made pads easier to solder and improved the strength of all the solder pads, adding additional copper around the pads.

Features
• Mounting holes: 30.5x30.5mm
• LiPo Power input: 3S-6S
• 8 Motor output
• BEC 5V-3A / 9V-3A
• STM32F722 MCU (216MHz max frequency)
• MPU6000 Gyro/ACC for smooth performance
• BMP280 Barometer
• OSD chip Onboard
• 5 available UARTs / I2C bus
• 16MB Onboard flash
• LC Filter for 5V VTX and CAM
• HD Plug for DJI Air Unit or Caddx Vista
• USB Type C connector
• Onboard RGB LED distribution for clean wiring to the
LED on the arm of the quad.
• Onboard 4 WS2812B RBG LED
• Direct solder connection and board space for TBS
Nano RX and TBS Unify Pro32 Nano
providing the ultimate in clean stack installation.
• Logic Side and USB current protection

Package includes:

  • (1X) Zeez F7 V2 3030 Flight Controller
  • (4X) Aluminum Standoff
  • (4X) Aluminum Nut
  • (1X) ESC to Flight Controller 8 Pin to 8 Pin JST SH 1.00mm connector
  • (1X) ESC to Flight Controller 8 Pin to Free wires (with JST SH crimp) 
  • JST SH 1.00mm connector 
  • (1X) JST SH 8 Pin Plastic Housing 
  • (1X) JST SH 10 Pin Plastic Housing 
  • (2X) 2.00mm Header Pin for VTX connection 
  • (2X) 2.54mm Header Pin for Receiver connection 
  • (1X) JST 6 pin to AirUnit Connector 


Why order from Rising Sun FPV?

• FREE Express* shipping over $250.

• Orders ship out of Townsville, QLD, Australia at 1530.

• Active on Instagram - Tag us or DM us!

• Watch what we are up to on our YouTube Channel!

• Join our Facebook Page for updates and RSFPV news.

• GST Registered.

• Gifts with every order!

• Veteran Owned and Operated.

• Defence and Service discounts - Apply Here

• 3D Printing and Custom design – Inquire Here.

• Visit us at our Store and have a yarn.

• Sponsor of Townsville FPVR, Next Level FPV

and the Australian Army Drone Racing Team.

• FPV Drone service, support and repairs.