FEATURES:
- MCU: STM32F722RET6 216MHz
- Gyro: MPU6000
- Betaflight OSD
- Up to 6S (28V) direct battery power
- Buzzer pads for external buzzer
- Built in voltage monitoring resistor
- 5V 2A BEC
- Led strip shares 5V with 5V/2A BEC
- 6 UARTS
- UART 3 TX: VTX Smart Audio
- UART 1 RX/TX Receiver pins
- Built in camera control pin with resistor and capacitor
- 5 Full UARTS with RX AND TX pins
- TX3,RX3 can be used for I2C for external compass
- 5V VTX & CAM power
- 16MB Blackbox flash chip
- RealPit VTX pit mode switch
- ESC Connector pads below connector
- M4 Can be selected either led_strip signal or M4 signal for RPM filtering
- LED on board for Status or other functions
- 20x20 Mounting 25x25mm Board Size
CONTENTS:
- 1x Tiny's LEDs Unity 20x20 FC
- 1x Wiring harness for Aikon PIN32 ESC
- 1x Wiring harness with un-pinned connector. (Build your own easily)
- 1x 8 pin ESC connector
- 1x 10 pin ESC connector
- 5x Mounting Gummies
- 5x M2 Reducer mount.(Slide Gummies over)
- 1x Set of 2.54mm pins (RX)
- 1x Set of 2.0mm Pins (VTX)
- 1x Tiny's LEDs Sticker :)Â
Why order from Rising Sun FPV?
• FREE Express* shipping over $250.
• Orders ship out of Townsville, QLD, Australia at 1530.
• Active on Instagram - Tag us or DM us!
• Watch what we are up to on our YouTube Channel!
• Join our Facebook Page for updates and RSFPV news.
• GST Registered.
• Gifts with every order!
• Veteran Owned and Operated.
• Defence and Service discounts - Apply Here
• 3D Printing and Custom design – Inquire Here.
• Visit us at our Store and have a yarn.
• Sponsor of Townsville FPVR, Next Level FPV
and the Australian Army Drone Racing Team.
• FPV Drone service, support and repairs.