Pyrodrone F4-PDB 30*30 flight controller is a dream come true for pilots who like using individual ESC.
Features: -Built in PDB for individual ESC build - Built in VTX switch (Pit mode) through Betaflight (No soldering or jumpers required) - Selectable jumper 5V or Vbat to power VTX -Built in Bluetooth module for Speedybee app - BT can be turn off using USER2 mode switch - Built in Camera Control pin with necessary resistor and capacitor near camera connection -All top solder pads for easy access and maintenance. -Selectable internal current sensor or external current sensor from 4 in 1 ESC. -Built in Secret Filter for vbat to VTX and camera -Built in PIT swith using USER1 mode Switch. -Built in Barometer
-MCU:STM32F405 216MH Proven noise free MPU6000 -Built in Betaflight OSD -2-8S direct battery input (BEC can withstand 60V max) -Buzzer pads for external buzzer -3.3V 100ma, 5V 1.5A BEC -Built in configurable Betaflight OSD Led strip shares 5V with 5V/1.5A BEC -6 UARTS. UART1 (INVERTER FOR SBUS), UART2 (FREE), UART3 (INVERTED TELEMETRY), use CLI command : Set tlm_halfduplex=off UART4 (Free), UART5 (Smart Audio) UART6 (Free) -Built in current sensor scale at 250 -Built in Baro meter -Built in camera control pin with resistor and capacitor -5 Full UARTS with RX AND TX pins -Logical pin layout for cleanest build possible -8 pin 4 IN 1 ESC plug -Remapable LED pad for additional motor output -TX3,RX3 can be used for I2C for external compass -5V, VBAT selectable VTX and CAM power -VTX pit mode switch (positive switch) -36x36 PCB with 30.5x30.5 mounting holes
Includes: 1 x Pyrodrone F4 PDB - MPU6000 Flight Controller 5 x Rubber grommets 3 x 4in1 Socket connectors (8 pin, 9 pin, 10 pin)