- MCU: 100MHz STM32F411
- IMU: MPU6000 accelerometer/gyro (SPI)
- Baro: BMP280 (I2C)
- OSD: INAV OSD w/ AT7456E chip
- Blackbox: No
- VCP & 2x UARTs
- 2x Motors, 5x Servos outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Built in inverter for SBUS input (UART1-RX)
- SoftSerial_Tx1: ST1 pad by default
- PPM: ST1 pad with softserial disabled
- Battery Voltage Sensor: 1:10 (Scale 1100)
- WS2812 Led Strip : Yes
- Beeper : Yes
- RSSI: No
- INAV Flight
- Target: MATEKF411
- Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 78A, 3.3V ADC, Scale 423
BEC 5V OUTPUT
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC VX OUTPUT
- Designed for Servos
- Voltage adjustable, 5V Default, 6V via jumper
- Continuous current: 3 Amps
- BEC 3.3V output
- Designed for Baro / Compass module/ OLED and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
- Mounting: 24 x 24mm, Φ2mm
- Dimensions: 41 x 28 x 10mm
- Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)
Why order from Rising Sun FPV?• FREE Express* shipping over $250.
• Orders ship out of Townsville, QLD, Australia at 1530.
• Active on Instagram - Tag us or DM us!
• Watch what we are up to on our YouTube Channel!
• Join our Facebook Page for updates and RSFPV news.
• GST Registered.
• Gifts with every order!
• Veteran Owned and Operated.
• Defence and Service discounts - Apply Here
• 3D Printing and Custom design – Inquire Here.
• Visit us at our Store and have a yarn.
• FPV Drone service, support and repairs.